role-ify

host_vars/localhost.yml

@@ -1,49 +0,0 @@
----
-# statically defined mapping of gpu profiles
-# nets adjusted tuned profiles based on the contents in /sys/class/drm/card*/device/pp_power_profile_mode
-# adds a power multiplier, see comments below for more info
-# more reference driver profiles may be added, but do not remove default.
-amdgpu_profiles:
-  default:
-    pwrmode: 0
-    pwr_cap_multi: 0.789473684210526 # 255W - default
-  3D:
-    pwrmode: 1
-    pwr_cap_multi: 0.789473684210526 # 255W - default
-  VR:
-    pwrmode: 4
-    pwr_cap_multi: 0.789473684210526 # 255W - default
-  compute:
-    pwrmode: 5
-    pwr_cap_multi: 0.789473684210526 # 255W - default
-  custom:
-    pwrmode: 6
-    pwr_cap_multi: 0.869969040247678 # 281W - slight boost
-
-# pwr_cap_multi is multiplier against *board power capability* to determine power limits on the associated profile
-# 0.5 = 50%, 1.0 = 100% (of card power capability, not stock limits)
-#
-# should not exceed 1.0, must be a float.  driver will do some rounding/stepping
-#
-# see 'power_max multi tab calculator.ods' for a calculator/spreadsheet
-#   adjust cell F14 (board max power) and the 'effective watts' column to update calculations
-#   microWatt board power capability can be discovered like so: 'cat /sys/class/drm/card*/device/hwmon/hwmon*/power1_cap_max'
-#    power_max_default_multi: 0.75 # 242.25W, slightly lower than true default
-#
-# minimum/maximum GPU clocks using 'powerplay' below
-# these do *not* apply to the resulting 'amdgpu-default' tuned profile
-#
-# only the others (eg: 'VR'/'custom') under amdgpu_profiles (below)
-# effective clocks are dynamically adjusted by the driver in this range - based on utilization
-# can find baseline values in the '/sys/class/drm/{{ card }}/device/pp_od_clk_voltage' file
-#   OD_RANGE indicates acceptable value ranges for SCLK (core) and MCLK (memory)
-#   Under 'OD_SCLK' and 'OD_MCLK' you will see 0/1.  These are the minimum/maximum values for the respective component.
-gpu_clock_min: "500" # default 500
-gpu_clock_max: "2500" # default 2529
-#
-# memory clocks are static, we only set a 'max' - high-refresh rate display quirk
-# this allows the memory clock to be adjusted
-gpumem_clock_max: "1050"
-#
-# optional, applies offset to GPU voltage, eg: '+100' = to boost GPU core voltage 100mV or 0.1V. for the 'custom' GPU profile.
-# gpu_mv_offset: "+50"

playbook.yml

@@ -1,10 +1,18 @@
 ---
 - hosts: localhost
   name: "Configure 'tuned' with AMD GPU control"
-  become: true
+  roles:
-  vars:
+    # role prepares/modifies 'tuned' with AMD GPU power/clock parameters
+    # creates a new tuned profile made for each permutation of (base) 'tuned' profile + AMD powerplay profile
+    - role: tuned_amdgpu
+      # GPU *core* min/max (dynamic) clock, only applies to non-default amdgpu profiles
+      gpu_clock_min: "750" # default 500
+      gpu_clock_max: "2600" # default 2529
+      # GPU memory *static* clock, should also only apply for non-default amdgpu profiles
+      gpumem_clock_max: "1050"
+      # optional, applies offset to GPU voltage, eg: '+100' = to boost GPU core voltage 100mV or 0.1V. for the 'custom' GPU profile.
+      # gpu_mv_offset: "+50"
       # list of source tuned profiles available on Fedora (TODO: should dynamically discover)
-    # further modified with AMD GPU power/clock parameters, creating new profiles. eg: 'balanced-amdgpu-VR'
       base_profiles:
         - balanced
         - desktop
@@ -13,93 +21,24 @@
         - network-throughput
         - powersave
         - virtual-host
-  handlers:
+      # mapping of typical Navi generation power profiles from:
-    - name: Restart tuned
+      #  /sys/class/drm/card*/device/pp_power_profile_mode
-      ansible.builtin.service:
+      # ref: https://www.kernel.org/doc/html/v4.20/gpu/amdgpu.html#pp-power-profile-mode
-        name: tuned
+      amdgpu_profiles:
-        state: restarted
+        default:
-  tasks:
+          pwrmode: 0
-    - name: Gather package facts
+          pwr_cap_multi: 0.789473684210526 # 255W - default
-      ansible.builtin.package_facts:
+        3D:
-        manager: auto
+          pwrmode: 1
-    - name: Replace 'power-profiles-daemon' with 'tuned' on Fedora 35+
+          pwr_cap_multi: 0.789473684210526 # 255W - default
-      ansible.builtin.package: # use with_items/pkg since 'dnf' module in Ansible doesn't support 'swap'
+        VR:
-        name: "{{ item.name }}"
+          pwrmode: 4
-        state: "{{ item.state }}"
+          pwr_cap_multi: 0.789473684210526 # 255W - default
-      with_items:
+        compute:
-        - {name: 'power-profiles-daemon', state: 'absent'}
+          pwrmode: 5
-        - {name: 'tuned', state: 'present'}
+          pwr_cap_multi: 0.789473684210526 # 255W - default
-      when:
+        custom:
-        - ('power-profiles-daemon' in ansible_facts.packages) or ('tuned' not in ansible_facts.packages)
+          pwrmode: 6
-        - ansible_distribution == 'Fedora'
+          pwr_cap_multi: 0.869969040247678 # 281W - slight boost
-        - ansible_distribution_major_version|int > 35
+      # both dictionaries are merged to create new 'tuned' profiles. eg:
-      register: fed_ppdtuned_swap
+      #   'balanced-amdgpu-default', 'balanced-amdgpu-3D', 'balanced-amdgpu-video'
-      # 'power-profiles-daemon' was added/conflicts with 'tuned' since F35
-      # otherwise, ensure the 'tuned' package is installed
-    - name: Install tuned
-      ansible.builtin.package:
-        name: tuned
-        state: present
-      when: (fed_ppdtuned_swap is not defined) or ('tuned' not in ansible_facts.packages)
-    - name: Determine GPU device in drm subsystem
-      ansible.builtin.shell:
-        cmd: grep -ls ^connected /sys/class/drm/*/status | grep -o card[0-9] | sort | uniq | sort -h | tail -1
-        executable: /bin/bash
-      changed_when: false
-      register: card
-    - name: Find hwmon/max power capability file for {{ card.stdout }}
-      ansible.builtin.find:
-        paths: /sys/class/drm/{{ card.stdout }}/device/hwmon
-        file_type: file
-        recurse: true
-        use_regex: true
-        patterns:
-          - '^power1_cap_max$'
-      register: hwmon
-    - name: Find hwmon/current power limit file for {{ card.stdout }}
-      ansible.builtin.find:
-        paths: /sys/class/drm/{{ card.stdout }}/device/hwmon
-        file_type: file
-        recurse: true
-        use_regex: true
-        patterns:
-          - '^power1_cap$'
-      register: powercap_set
-    - name: Get max power capability for {{ card.stdout }}
-      ansible.builtin.slurp:
-        src: "{{ hwmon.files.0.path }}"
-      register: power_max_b64
-    - name: Create custom profile directories
-      ansible.builtin.file:
-        state: directory
-        path: /etc/tuned/{{ item.1 }}-amdgpu-{{ item.0.key }}
-        mode: "0755"
-      with_nested:
-        - "{{ lookup('dict', amdgpu_profiles) }}"
-        - "{{ base_profiles }}"
-    - name: Template AMDGPU control/reset scripts
-      ansible.builtin.template:
-        src: templates/amdgpu-clock.sh.j2
-        dest: /etc/tuned/{{ item.1 }}-amdgpu-{{ item.0.key }}/amdgpu-clock.sh
-        owner: root
-        group: root
-        mode: "0755"
-      with_nested:
-        - "{{ lookup('dict', amdgpu_profiles) }}"
-        - "{{ base_profiles }}"
-      notify: restart tuned
-    - name: Template custom tuned profiles
-      ansible.builtin.template:
-        src: templates/tuned.conf.j2
-        dest: /etc/tuned/{{ item.1 }}-amdgpu-{{ item.0.key }}/tuned.conf
-        owner: root
-        group: root
-        mode: "0644"
-      with_nested:
-        - "{{ lookup('dict', amdgpu_profiles) }}"
-        - "{{ base_profiles }}"
-      notify: restart tuned
-    - name: Ensure tuned is enabled
-      ansible.builtin.service:
-        name: tuned
-        enabled: true

roles/tuned_amdgpu/defaults/main.yml

@@ -1,7 +1,8 @@
 ---
-# misc default vars handling unit conversion RE: power capabilities/limits
+# defaults file for tuned_amdgpu
 #
-# the discovered board limit for power capability (in microWatts)
+# vars handling unit conversion RE: power capabilities/limits
+# the discovered board limit for power capability; in microWatts, then converted
 power_max: "{{ power_max_b64['content'] | b64decode }}"
 board_watts: "{{ power_max | int / 1000000 }}"
 

roles/tuned_amdgpu/handlers/main.yml

@@ -0,0 +1,6 @@
+---
+# handlers file for tuned_amdgpu
+- name: Restart tuned
+  ansible.builtin.service:
+    name: tuned
+    state: restarted

roles/tuned_amdgpu/tasks/main.yml

@@ -0,0 +1,103 @@
+---
+# tasks file for tuned_amdgpu
+#
+- name: Gather package facts
+  ansible.builtin.package_facts:
+    manager: auto
+
+# note: power-profiles-daemon conflicts with tuned
+# since F35 it must be removed so tuned may be installed
+- name: Replace 'power-profiles-daemon' with 'tuned' on Fedora 35+
+  ansible.builtin.package: # use with_items/pkg since 'dnf' module in Ansible doesn't support 'swap'
+    name: "{{ item.name }}"
+    state: "{{ item.state }}"
+  with_items:
+    - {name: 'power-profiles-daemon', state: 'absent'}
+    - {name: 'tuned', state: 'present'}
+  when:
+    - ('power-profiles-daemon' in ansible_facts.packages) or ('tuned' not in ansible_facts.packages)
+    - ansible_distribution == 'Fedora'
+    - ansible_distribution_major_version|int > 35
+  register: fed_ppdtuned_swap
+  become: true
+
+- name: Install tuned
+  ansible.builtin.package:
+    name: tuned
+    state: present
+  when: (fed_ppdtuned_swap is not defined) or ('tuned' not in ansible_facts.packages)
+  become: true
+
+- name: Determine GPU device in drm subsystem
+  ansible.builtin.shell:
+    cmd: grep -ls ^connected /sys/class/drm/*/status | grep -o card[0-9] | sort | uniq | sort -h | tail -1
+    executable: /bin/bash
+  changed_when: false
+  register: card
+
+- name: Find hwmon/max power capability file for {{ card.stdout }}
+  ansible.builtin.find:
+    paths: /sys/class/drm/{{ card.stdout }}/device/hwmon
+    file_type: file
+    recurse: true
+    use_regex: true
+    patterns:
+      - '^power1_cap_max$'
+  register: hwmon
+
+- name: Find hwmon/current power limit file for {{ card.stdout }}
+  ansible.builtin.find:
+    paths: /sys/class/drm/{{ card.stdout }}/device/hwmon
+    file_type: file
+    recurse: true
+    use_regex: true
+    patterns:
+      - '^power1_cap$'
+  register: powercap_set
+
+- name: Get max power capability for {{ card.stdout }}
+  ansible.builtin.slurp:
+    src: "{{ hwmon.files.0.path }}"
+  register: power_max_b64
+
+- name: Create custom profile directories
+  ansible.builtin.file:
+    state: directory
+    path: /etc/tuned/{{ item.1 }}-amdgpu-{{ item.0.key }}
+    mode: "0755"
+  with_nested:
+    - "{{ lookup('dict', amdgpu_profiles) }}"
+    - "{{ base_profiles }}"
+  become: true
+
+- name: Template AMDGPU control/reset scripts
+  ansible.builtin.template:
+    src: templates/amdgpu-clock.sh.j2
+    dest: /etc/tuned/{{ item.1 }}-amdgpu-{{ item.0.key }}/amdgpu-clock.sh
+    owner: root
+    group: root
+    mode: "0755"
+  with_nested:
+    - "{{ lookup('dict', amdgpu_profiles) }}"
+    - "{{ base_profiles }}"
+  notify: Restart tuned
+  become: true
+
+- name: Template custom tuned profiles
+  ansible.builtin.template:
+    src: templates/tuned.conf.j2
+    dest: /etc/tuned/{{ item.1 }}-amdgpu-{{ item.0.key }}/tuned.conf
+    owner: root
+    group: root
+    mode: "0644"
+  with_nested:
+    - "{{ lookup('dict', amdgpu_profiles) }}"
+    - "{{ base_profiles }}"
+  notify: Restart tuned
+  become: true
+
+- name: Ensure tuned is enabled
+  ansible.builtin.service:
+    name: tuned
+    enabled: true
+  become: true