49 lines
2.3 KiB
YAML
49 lines
2.3 KiB
YAML
---
|
|
# statically defined mapping of gpu profiles
|
|
# nets adjusted tuned profiles based on the contents in /sys/class/drm/card*/device/pp_power_profile_mode
|
|
# adds a power multiplier, see comments below for more info
|
|
# more reference driver profiles may be added, but do not remove default.
|
|
amdgpu_profiles:
|
|
default:
|
|
pwrmode: 0
|
|
pwr_cap_multi: 0.789473684210526 # 255W - default
|
|
3D:
|
|
pwrmode: 1
|
|
pwr_cap_multi: 0.789473684210526 # 255W - default
|
|
VR:
|
|
pwrmode: 4
|
|
pwr_cap_multi: 0.789473684210526 # 255W - default
|
|
compute:
|
|
pwrmode: 5
|
|
pwr_cap_multi: 0.789473684210526 # 255W - default
|
|
custom:
|
|
pwrmode: 6
|
|
pwr_cap_multi: 0.869969040247678 # 281W - slight boost
|
|
|
|
# pwr_cap_multi is multiplier against *board power capability* to determine power limits on the associated profile
|
|
# 0.5 = 50%, 1.0 = 100% (of card power capability, not stock limits)
|
|
#
|
|
# should not exceed 1.0, must be a float. driver will do some rounding/stepping
|
|
#
|
|
# see 'power_max multi tab calculator.ods' for a calculator/spreadsheet
|
|
# adjust cell F14 (board max power) and the 'effective watts' column to update calculations
|
|
# microWatt board power capability can be discovered like so: 'cat /sys/class/drm/card*/device/hwmon/hwmon*/power1_cap_max'
|
|
# power_max_default_multi: 0.75 # 242.25W, slightly lower than true default
|
|
#
|
|
# minimum/maximum GPU clocks using 'powerplay' below
|
|
# these do *not* apply to the resulting 'amdgpu-default' tuned profile
|
|
#
|
|
# only the others (eg: 'VR'/'custom') under amdgpu_profiles (below)
|
|
# effective clocks are dynamically adjusted by the driver in this range - based on utilization
|
|
# can find baseline values in the '/sys/class/drm/{{ card }}/device/pp_od_clk_voltage' file
|
|
# OD_RANGE indicates acceptable value ranges for SCLK (core) and MCLK (memory)
|
|
# Under 'OD_SCLK' and 'OD_MCLK' you will see 0/1. These are the minimum/maximum values for the respective component.
|
|
gpu_clock_min: "500" # default 500
|
|
gpu_clock_max: "2500" # default 2529
|
|
#
|
|
# memory clocks are static, we only set a 'max' - high-refresh rate display quirk
|
|
# this allows the memory clock to be adjusted
|
|
gpumem_clock_max: "1050"
|
|
#
|
|
# optional, applies offset to GPU voltage, eg: '+100' = to boost GPU core voltage 100mV or 0.1V. for the 'custom' GPU profile.
|
|
#gpu_mv_offset: "+50"
|