tuned-amdgpu/roles/tuned_amdgpu/templates/amdgpu-profile.sh.j2

#!/bin/bash
{{ ansible_managed | comment }}
# This is the script for 'amdgpu' profiles, (re)setting clock/power/voltage tunables
#
# AMDGPU driver/sysfs references:
#   https://01.org/linuxgraphics/gfx-docs/drm/gpu/amdgpu.html
#   https://docs.kernel.org/gpu/amdgpu/thermal.html
#
# Variables shown below named '$TUNED_...' are given values by '/etc/tuned/amdgpu-profile-vars.conf'
#
# determine the connected GPU using the DRM subsystem. FIXME: assumes one card, make configurable
# TODO: break this out into a role var; assume renderD128
#       allow/use many configs
CARD=$(/usr/bin/grep -ls ^connected /sys/class/drm/*/status | /usr/bin/grep -o 'card[0-9]' | /usr/bin/sort | /usr/bin/uniq | /usr/bin/sort -h | /usr/bin/tail -1)

function get_hwmon_dir() {
    CARD_DIR="/sys/class/drm/${1}/device/"
    for CANDIDATE in "${CARD_DIR}"/hwmon/hwmon*; do
            if [[ -f "${CANDIDATE}"/power1_cap ]]; then
                    # found a valid hwmon dir
                    echo "${CANDIDATE}"
            fi
    done
}

# determine the hwmon directory
HWMON_DIR=$(get_hwmon_dir "${CARD}")

# read all of the power profiles, used to get the IDs for assignment later
PROFILE_MODES=$(< /sys/class/drm/"${CARD}"/device/pp_power_profile_mode)

# get power capability; later used determine limits
read -r -d '' POWER_CAP < "$HWMON_DIR"/power1_cap_max

function amdgpu_profile_reset() {

        # set control mode back to auto
        #   attempts to dynamically set optimal power profile for (load) conditions
        echo 'auto' | tee /sys/class/drm/"${CARD}"/device/power_dpm_force_performance_level

        # reset any existing profile clock changes
        echo 'r' | tee /sys/class/drm/"${CARD}"/device/pp_od_clk_voltage

        # adjust power limit using multiplier against board capability
        POWER_LIM_DEFAULT=$(/usr/bin/awk -v m="$POWER_CAP" -v n="${TUNED_tuned_amdgpu_power_multi_def}" 'BEGIN {printf "%.0f", (m*n)}')
        echo "$POWER_LIM_DEFAULT" | tee "${HWMON_DIR}/power1_cap"

        # extract the power-saving profile ID number
        PROF_DEFAULT_NUM=$(/usr/bin/awk '$0 ~ /BOOTUP_DEFAULT.*:/ {print $1}' <<< "$PROFILE_MODES")

        # reset power/clock heuristics to power-saving
        echo "${PROF_DEFAULT_NUM}" | tee /sys/class/drm/"${CARD}"/device/pp_power_profile_mode

        # delay before returning - have mercy, may be followed with other profile function calls
        sleep 0.25

}

function amdgpu_profile_overclock() {
        # set manual control mode
        #   allows control via 'pp_dpm_mclk', 'pp_dpm_sclk', 'pp_dpm_pcie', 'pp_dpm_fclk', and 'pp_power_profile_mode' files
        echo 'manual' | tee /sys/class/drm/"${CARD}"/device/power_dpm_force_performance_level

        # force GPU core and memory into highest clocks (fix flickering and poor power management)
        echo "s 0 ${TUNED_tuned_amdgpu_clock_min}" | tee /sys/class/drm/"${CARD}"/device/pp_od_clk_voltage
        echo "s 1 ${TUNED_tuned_amdgpu_clock_max}" | tee /sys/class/drm/"${CARD}"/device/pp_od_clk_voltage
        echo "m 1 ${TUNED_tuned_amdgpu_memclock_static}" | tee /sys/class/drm/"${CARD}"/device/pp_od_clk_voltage

        # under/over-voltage is considered optional or less likely to be defined, checked before use
        if [[ -n ${TUNED_tuned_amdgpu_mv_offset} ]]; then
            echo "vo ${TUNED_tuned_amdgpu_mv_offset}" | tee /sys/class/drm/"${CARD}"/device/pp_od_clk_voltage
        fi

        # commit the changes
        echo 'c' | tee /sys/class/drm/"${CARD}"/device/pp_od_clk_voltage

        # adjust power limit using multiplier against board capability
        POWER_LIM_OC=$(/usr/bin/awk -v m="$POWER_CAP" -v n="${TUNED_tuned_amdgpu_power_multi_oc}" 'BEGIN {printf "%.0f", (m*n)}')
        echo "$POWER_LIM_OC" | tee "${HWMON_DIR}/power1_cap"

        # avoid display flickering, force OC'd memory to highest clock
        echo '3' | tee /sys/class/drm/"${CARD}"/device/pp_dpm_mclk

        # extract the VR power profile ID number
        PROF_VR_NUM=$(/usr/bin/awk '$0 ~ /VR.*:/ {print $1}' <<< "$PROFILE_MODES")

        # force 'overclocked' profile to 'VR' power/clock heuristics
        # latency/frame timing seemed favorable with relatively-close minimum clocks
        echo "${PROF_VR_NUM}" | tee /sys/class/drm/"${CARD}"/device/pp_power_profile_mode

        # delay before returning - have mercy, may be followed with other profile function calls
        sleep 0.25

}

function amdgpu_profile_help() {
        echo "Usage: $0 {reset|overclock|peak}"
        exit 1
}

# Check if an argument was provided
if [ -z "$1" ]; then
        amdgpu_profile_help
fi

# 'tuned' has trouble running scripts with args - treats '/path/to/script.sh arg1' as one complete item
# so, based on the active profile - run the right function
read -r -d '' TUNED_PROFILE < /etc/tuned/active_profile

case "$TUNED_PROFILE" in
        *-amdgpu-default)
                amdgpu_profile_reset
                ;;
        *-amdgpu-overclock)
                amdgpu_profile_reset
                amdgpu_profile_overclock
                ;;
        *-amdgpu-peak)
                # do everything the other profiles do... then set each clock table to their peak
                amdgpu_profile_reset
                amdgpu_profile_overclock
                echo '1' | tee /sys/class/drm/"${CARD}"/device/pp_dpm_sclk
                echo '3' | tee /sys/class/drm/"${CARD}"/device/pp_dpm_mclk
                echo '2' | tee /sys/class/drm/"${CARD}"/device/pp_dpm_fclk
                echo '2' | tee /sys/class/drm/"${CARD}"/device/pp_dpm_socclk
                # if I understand correctly, 'power_dpm_force_performance_level' at 'profile_peak' achieves similar... but precludes some control
                ;;
        *)
                amdgpu_profile_help
                ;;
esac