77 lines
3.4 KiB
Markdown
77 lines
3.4 KiB
Markdown
# tuned-amdgpu
|
|
|
|
Hacky solution to integrate AMDGPU power/clock control into `tuned` profiles
|
|
with Ansible.
|
|
|
|
Extends every `tuned` profile found in `/usr/lib/tuned`
|
|
with [AMDGPU hwmon interfaces](https://docs.kernel.org/gpu/amdgpu/thermal.html) in three variations:
|
|
|
|
- `default`: the out-of-the-box GPU clock/power configuration
|
|
- `overclock`: the _optimized_ card configuration. Includes the clock/voltage/power settings.
|
|
- `peak`: the same as `overclock` with gating removed. Intended for profiling.
|
|
|
|
Contrary to the name, the `overclock` profile may also be used to _under-{volt,clock}_.
|
|
|
|
|
|
## Assumptions / Limitations
|
|
|
|
Only tested with `RX6000` series GPUs and the _mainline_ `amdgpu` driver. Other permutations
|
|
_may not_ work properly. Please use at your own risk!
|
|
|
|
Multiple GPUs in a single system are not yet managed,
|
|
assumes a single GPU with displays attached.
|
|
|
|
Please report any issues or PRs, all will be considered.
|
|
|
|
|
|
## Config
|
|
|
|
```ini
|
|
; file: /etc/tuned/amdgpu-profile-vars.conf
|
|
tuned_amdgpu_clock_min=500
|
|
tuned_amdgpu_clock_max=2715
|
|
tuned_amdgpu_memclock_static=1075
|
|
tuned_amdgpu_power_multi_def=0.869969040247678
|
|
tuned_amdgpu_power_multi_oc=1.0
|
|
tuned_amdgpu_mv_offset=+60
|
|
```
|
|
|
|
These represent the [Variables below](#variables); changes outside of _Ansible_
|
|
are not immediately effective, requiring switching profiles or restarting the service.
|
|
|
|
The `gamemode` service offers dynamic switching. Please see this [Arch Wiki](https://wiki.archlinux.org/title/Gamemode) document
|
|
for more information. Example:
|
|
|
|
```ini
|
|
; ~/.config/gamemode.ini snippet
|
|
[custom]
|
|
start=tuned-adm profile latency-performance-amdgpu-overclock
|
|
end=tuned-adm profile latency-performance-amdgpu-default
|
|
```
|
|
|
|
## Profiles
|
|
|
|
Two _'profiles'_ are in each name:
|
|
|
|
- before `amdgpu` is the source profile provided with `tuned`
|
|
- after `amdgpu` tells the GPU clock profile offered, outlined below
|
|
|
|
| Output profile | Description |
|
|
|:---|---|
|
|
| `balanced-amdgpu-default` | Includes the (assumed) existing `balanced` tuned profile.<br/><br/>Only adjusts the GPU power limit (typically lower). Clocks/voltage curve remain the default. |
|
|
| `desktop-amdgpu-overclock` | Includes the (assumed) existing `desktop` tuned profile.<br/><br/>Adjusts the GPU power limit, clocks, _and_ the voltage curve. |
|
|
| `desktop-amdgpu-peak` | Includes the (assumed) existing `desktop` tuned profile.<br/><br/>Same as the `overclock` profile, but locks clocks to their highest configured values |
|
|
|
|
|
|
## Variables
|
|
|
|
These are the variables you'll want to change/consider.
|
|
|
|
| Variable | Description |
|
|
|------------------------|-------------|
|
|
| `tuned_amdgpu_clock_min` | Mininum **GPU** clock _(in `Mhz`)_ for `overclock` and `peak` profiles |
|
|
| `tuned_amdgpu_clock_max` | Maximum **GPU** clock _(in `MHz`)_ for `overclock` and `peak` profiles |
|
|
| `tuned_amdgpu_mv_offset` | GPU voltage _offset_. Takes `+/-` some integer in _millivolts_ to raise or lower. eg: `-25` for `0.025V` undervolt. |
|
|
| `tuned_amdgpu_power_multi_def` | Float between `0.0` _(none)_ and `1.0` _(full)_; effective power limit relative to _board capability_. For the `default` profiles |
|
|
| `tuned_amdgpu_power_multi_oc` | Instance of `tuned_amdgpu_power_multi_def` for `overclock` and `peak` profiles |
|
|
| `tuned_amdgpu_memclock_static` | _Static_ **memory** clock _(in `MHz`)_ for `overclock` and `peak` profiles.<br/><br/>Not the effective data rate _(multiplied by generation)_, but the actual clock. Static assignment avoids potential display flickering. |
|