68 lines
3.4 KiB
Markdown
68 lines
3.4 KiB
Markdown
# tuned-amdgpu
|
|
|
|
Hacky solution to integrate AMDGPU power/clock control into `tuned` profiles
|
|
with Ansible.
|
|
|
|
Provides three variations of the `tuned` profiles found in `/usr/lib/tuned`
|
|
using the [AMDGPU hwmon interfaces](https://docs.kernel.org/gpu/amdgpu/thermal.html):
|
|
|
|
- `default`: the out-of-the-box configuration
|
|
- `overclock`: the optimized card configuration. Includes all of the clock/voltage/power settings
|
|
- `peak`: the same as `overclock`, but with clock gating removed. May help profiling
|
|
|
|
Contrary to the name, `overclock` can be used to de-tune the card as well.
|
|
|
|
_Warning_: This is only tested with `RX6000` series GPUs, others may _not_ work properly. Use at your own risk!
|
|
|
|
## Profiles
|
|
|
|
Two _'profiles'_ are in each name:
|
|
|
|
- before `amdgpu` is the source profile provided with `tuned`
|
|
- after `amdgpu` tells the GPU clock profile offered, outlined below
|
|
|
|
| Output profile | Description |
|
|
|:---|---|
|
|
| `balanced-amdgpu-default` | Includes the (assumed) existing `balanced` tuned profile.<br/><br/>Only adjusts the GPU power limit (typically lower). Clocks/voltage curve remain the default. |
|
|
| `desktop-amdgpu-overclock` | Includes the (assumed) existing `desktop` tuned profile.<br/><br/>Adjusts the GPU power limit, clocks, _and_ the voltage curve. |
|
|
| `desktop-amdgpu-peak` | Includes the (assumed) existing `desktop` tuned profile.<br/><br/>Same as the `overclock` profile, but locks clocks to their highest configured values |
|
|
|
|
## Config
|
|
|
|
The playbook will render/make effective this config file: `/etc/tuned/amdgpu-profile-vars.conf`
|
|
|
|
Here is a preview:
|
|
|
|
```ini
|
|
gpu_clock_min=500
|
|
gpu_clock_max=2715
|
|
gpumem_clock_static=1075
|
|
gpu_power_multi_def=0.869969040247678
|
|
gpu_power_multi_oc=1.0
|
|
gpu_mv_offset=+60
|
|
```
|
|
|
|
Changes outside of _Ansible_ are not immediately effective. Switching `tuned` profiles or restarting the service would be required.
|
|
|
|
One can use `gamemode` for dynamic switching. Sample `~/.config/gamemode.ini` below:
|
|
|
|
```ini
|
|
[custom]
|
|
start=tuned-adm profile latency-performance-amdgpu-overclock
|
|
end=tuned-adm profile latency-performance-amdgpu-default
|
|
```
|
|
|
|
See this [Arch Wiki](https://wiki.archlinux.org/title/Gamemode) link for more comprehensive information.
|
|
|
|
## Variables
|
|
|
|
These are the variables you'll want to change/consider.
|
|
|
|
| Variable | Description |
|
|
|------------------------|---------------------------------------------------------------------------------------|
|
|
| gpu_clock_min | Sets the min (dynamic) GPU clock (in `Mhz`) for the non-default `amdgpu` profiles |
|
|
| gpu_clock_max | Sets the max (dynamic) GPU clock (in `MHz`) for the non-default `amdgpu` profiles |
|
|
| gpumem_clock_static | Sets the _static_ memory clock for the GPU (in `MHz`). This is *not* the _effective_ data rate. _That_ would be a multiple of _this_ depending on the type of VRAM.<br/><br/>To avoid flickering this is *not* allowed to change with load, only between `default` and `overclock`/`peak` profiles. |
|
|
| gpu_mv_offset | GPU core voltage offset. Takes +/- some integer in millivolts. Can be used to both over _and_ under volt. eg: `-50` _(undervolt `50mV` or `0.05V`)_ |
|
|
| gpu_power_multi_def | Float between `0.0` and `1.0`; controls power limit relative to the board _capability_. For _'default'_-named power profiles. |
|
|
| gpu_power_multi_oc | Similar to `gpu_power_multi_def`, for _'overclock'_-named power profiles. |
|